6 Gauge WindyNation Power-Flex Battery & Welding Cable + Cable Lugs + Heat Shrink Tubing Combo Listing with 100% Pure Copper Cable Purchase your cable, heat shrink tubing and cable lugs all in one listing and save money! Every purchase includes 6 feet of appropriately sized heat shrink tubing, which is enough to heat shrink 30pcs of cable lugs Simply choose your desired length and color of 6 gauge cable, cable lug quantity and stud size, and heat shrink tubing using the drop-down tabs above. 6 Gauge Power-Flex Welding and Battery Cable Description:WindyNation’s Power-Flex Cable is a highly flexible industrial grade electrical cable. Power-Flex Cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. See Technical Specifications Chart below.WindyNation’s PowerFlex cable is 100% PURE copper cable. It is NOT cheap copper clad aluminum (CCA) cable. Power-Flex 6 Gauge Cable Technical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCOperating Temperature: -50°C to 105°CStandards: IEC60245, RoHS 6 Gauge Part #’s are CBL-CSBL-06 (black) and CBL-CSRD-06 (red) 6 Gauge Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics Heat Shrink Specifications Color: Solid black (no printing on tube)Size: Inner diameter = 1/2″ (fits 6 gauge cable) Material: Polyolefin thin wall cross-linked Shrink Ratio: 2:1Chemical and Heat Resistance: Treated with flame retardant compounds and resistant to most chemical solventsTemperature Rating: 125 CentigradeVoltage Rating: 600 VoltsHeat Shrink Industry ApprovalsCSA approved for up to 125 Centigrade and 600 VoltsRoHS Compliant
1/0 Gauge WindyNation Power-Flex Battery & Welding Cable + Cable Lugs + Heat Shrink Tubing Combo Listing with 100% Pure Copper Cable Purchase your cable, heat shrink tubing and cable lugs all in one listing and save money! Every purchase includes 6 feet of appropriately sized heat shrink tubing, which is enough to heat shrink 30pcs of cable lugs Simply choose your desired length and color of 1/0 gauge cable, cable lug quantity and stud size, and heat shrink tubing using the drop-down tabs above. 1/0 Gauge Power-Flex Welding and Battery Cable Description:WindyNation’s Power-Flex Cable is a highly flexible industrial grade electrical cable. Power-Flex Cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. See Technical Specifications Chart below.WindyNation’s PowerFlex cable is 100% PURE copper cable. It is NOT cheap copper clad aluminum (CCA) cable. Power-Flex 1/0 Gauge Cable Technical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCOperating Temperature: -50°C to 105°CStandards: IEC60245, RoHS 1/0 Gauge Part #’s are CBL-CSBL-10 (black) and CBL-CSRD-10 (red) 1/0 Gauge Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics Heat Shrink Specifications Color: Solid black (no printing on tube)Size: Inner diameter = 3/4″ (fits 1/0 gauge cable) Material: Polyolefin thin wall cross-linked Shrink Ratio: 2:1Chemical and Heat Resistance: Treated with flame retardant compounds and resistant to most chemical solventsTemperature Rating: 125 CentigradeVoltage Rating: 600 VoltsHeat Shrink Industry ApprovalsCSA approved for up to 125 Centigrade and 600 VoltsRoHS Compliant
4 Gauge WindyNation Power-Flex Battery & Welding Cable + Cable Lugs + Heat Shrink Tubing Combo Listing with 100% Pure Copper Cable Purchase your cable, heat shrink tubing and cable lugs all in one listing and save money! Every purchase includes 6 feet of appropriately sized heat shrink tubing, which is enough to heat shrink 30pcs of cable lugs Simply choose your desired length and color of 4 gauge cable, cable lug quantity and stud size, and heat shrink tubing using the drop-down tabs above. 4 Gauge Power-Flex Welding and Battery Cable Description:WindyNation’s Power-Flex Cable is a highly flexible industrial grade electrical cable. Power-Flex Cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. See Technical Specifications Chart below.WindyNation’s PowerFlex cable is 100% PURE copper cable. It is NOT cheap copper clad aluminum (CCA) cable. Power-Flex 4 Gauge Cable Technical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCOperating Temperature: -50°C to 105°CStandards: IEC60245, RoHS 4 Gauge Part #’s are CBL-CSBL-04 (black) and CBL-CSRD-04 (red) 4 Gauge Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristicsHeat Shrink Specifications Color: Solid black (no printing on tube)Size: Inner diameter = 1/2″ (fits 4 gauge cable) Material: Polyolefin thin wall cross-linked Shrink Ratio: 2:1Chemical and Heat Resistance: Treated with flame retardant compounds and resistant to most chemical solventsTemperature Rating: 125 CentigradeVoltage Rating: 600 VoltsHeat Shrink Industry ApprovalsCSA approved for up to 125 Centigrade and 600 VoltsRoHS Compliant
WindyNation 6 AWG Power-Flex Welding Cable WindyNation’s Power-Flex Welding cable is a highly flexible industrial grade electrical cable. WindyNation’s welding cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. Simply choose the desired jacket color and cable length from the selections above. Please Note: The “50% Black + 50% Red” option above means half the cable in your order will have black insulation the other half will have red insulation. For example, if you order 100 feet of the “50% Black + 50% Red” option, you will receive 50 feet of black insulation welding cable and 50 feet of red insulation welding cable. Technical Specifications Conductor Material: Fully annealed bare stranded copper wire Insulation Material: EPDM (with polymer tape separator) Maximum Voltage: 600 VDC Operating Temperature: -50°C to 105°C Standards: IEC60245, RoHS
2/0 Gauge WindyNation Power-Flex Battery & Welding Cable + Cable Lugs + Heat Shrink Tubing Combo Listing with 100% Pure Copper Cable Purchase your cable, heat shrink tubing and cable lugs all in one listing and save money! Every purchase includes 6 feet of appropriately sized heat shrink tubing, which is enough to heat shrink 30pcs of cable lugs Simply choose your desired length and color of 2/0 gauge cable, cable lug quantity and stud size, and heat shrink tubing using the drop-down tabs above. 2/0 Gauge Power-Flex Welding and Battery Cable Description:WindyNation’s Power-Flex Cable is a highly flexible industrial grade electrical cable. Power-Flex Cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. See Technical Specifications Chart below.WindyNation’s PowerFlex cable is 100% PURE copper cable. It is NOT cheap copper clad aluminum (CCA) cable. Power-Flex 2/0 Gauge Cable Technical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCOperating Temperature: -50°C to 105°CStandards: IEC60245, RoHS 2/0 Gauge Part #’s are CBL-CSBL-20 (black) and CBL-CSRD-20 (red) 2/0 Gauge Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics Heat Shrink Specifications Color: Solid black (no printing on tube)Size: Inner diameter = 3/4″ (fits 2/0 gauge cable) Material: Polyolefin thin wall cross-linked Shrink Ratio: 2:1Chemical and Heat Resistance: Treated with flame retardant compounds and resistant to most chemical solventsTemperature Rating: 125 CentigradeVoltage Rating: 600 VoltsHeat Shrink Industry ApprovalsCSA approved for up to 125 Centigrade and 600 VoltsRoHS Compliant
Normal 0 false false false EN-US X-NONE X-NONE 10 AWG Solar Panel CableSold in lengths ranging from 5 to 300 feet. Simply select the length you want from the tab at the top of this web page.Technical Specifications:Photovoltaic module interconnection cable for use with or without a raceway in accordance with the Wiring Systems, Article 690 in the National Electric Code (NEC), NFPA 70. Wire Thickness 10 AWG (6 mm2) Current Rating 30 amps Maximum Voltage 600 VDC Operating Temperature -40 to 90 Celsius Certification XLPE USE-2 Conductor Type Annealed Copper Solar panel cable is typically sold in 16, 14, 12 and 10 AWG sizes. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the four. Using large diameter cable minimizes power loss in your solar panel system.
6 AWG Battery and Inverter Cableswith WindyNation Power-Flex Pure Copper Cable WindyNation’s battery cables are manufactured using our Power-Flex Welding cable, which is a highly flexible industrial grade electrical copper cable. WindyNation’s battery cables are excellent for battery bank wiring, inverter cables, grounding cables, RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. Our battery cables are available with pre-attached cable lugs with 5/16″ or 3/8″ diameter mounting holes. Polyolefin heat shrink tubing is applied at the cable lug attachment point to form a protective seal. Simply choose your desired cable color, cable length, cable lug size, and quantity from the selections above. Step 1: Select cable color using the tab aboveStep 2: Select cable length using the tab aboveStep 3: Select connector options at cable ends using the tab aboveStep 4: Select quantity (pack size) using the tab above See below for Windy Nation’s 6 AWG Power-Flex Welding Cable specifications and Cable Lug Specifications Power-Flex CableTechnical Specifications Conductor Material: Fully annealed bare stranded copper wire Insulation Material: EPDM (with polymer tape separator) Maximum Voltage: 600 VDC Operating Temperature: -50°C to 105°C Standards: IEC60245, RoHS Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics
4/0 Gauge WindyNation Power-Flex Battery & Welding Cable + Cable Lugs + Heat Shrink Tubing Combo Listing with 100% Pure Copper Cable Purchase your cable, heat shrink tubing and cable lugs all in one listing and save money! Every purchase includes 6 feet of appropriately sized heat shrink tubing, which is enough to heat shrink 30pcs of cable lugs Simply choose your desired length and color of 4/0 gauge cable, cable lug quantity and stud size, and heat shrink tubing using the drop-down tabs above. 4/0 Gauge Power-Flex Welding and Battery Cable Description:WindyNation’s Power-Flex Cable is a highly flexible industrial grade electrical cable. Power-Flex Cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. See Technical Specifications Chart below.WindyNation’s PowerFlex cable is 100% PURE copper cable. It is NOT cheap copper clad aluminum (CCA) cable. Power-Flex 4/0 Gauge Cable Technical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCOperating Temperature: -50°C to 105°CStandards: IEC60245, RoHS 4/0 Gauge Part #’s are CBL-CSBL-40 (black) and CBL-CSRD-40 (red) 4/0 Gauge Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics Heat Shrink Specifications Color: Solid black (no printing on tube)Size: Inner diameter = 1″ (fits 4/0 gauge cable) Material: Polyolefin thin wall cross-linked Shrink Ratio: 2:1Chemical and Heat Resistance: Treated with flame retardant compounds and resistant to most chemical solventsTemperature Rating: 125 CentigradeVoltage Rating: 600 VoltsHeat Shrink Industry ApprovalsCSA approved for up to 125 Centigrade and 600 VoltsRoHS Compliant
Custom 2 Gauge Battery and Inverter Cableswith WindyNation Power-Flex 100% Pure Copper Cable 100% made in the USA pure copper battery cable. Our battery cables are assembled in Ventura, CA using automated 10 ton pneumatic crimpers producing an excellent quality crimp. WindyNation’s battery cables are manufactured using our Power-Flex Welding cable, which is a highly flexible industrial grade electrical copper cable. WindyNation’s battery cables are excellent for battery bank wiring, inverter cables, grounding cables, RV & car wiring applications, golf cart wiring, and any other application where a highly flexible pure copper conductor is required. Our battery cables are available with pre-attached cable lugs with 5/16″ or 3/8″ diameter mounting holes. Polyolefin heat shrink tubing is applied at the cable lug attachment point to form a protective seal. Simply choose your desired cable color(s), cable length, and cable lug stud size from the drop-down tabs. See below for Windy Nation’s 2 AWG Power-Flex Welding Cable specifications and Cable Lug specifications Power-Flex CableTechnical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCMaximum Amperage (2 gauge): 205 ampsOperating Temperature: -50°C to 105°CStandards: SAE J1127 Certified Battery Cable Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristicsBuilt to UL specifications with ASTM-B-152 copper
WindyNation 2/0 AWG Power-Flex Welding Cable WindyNation’s Power-Flex Welding cable is a highly flexible industrial grade electrical cable. WindyNation’s welding cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. Simply choose the desired jacket color and cable length from the selections above. Please Note: The “50% Black + 50% Red” option above means half the cable in your order will have black insulation the other half will have red insulation. For example, if you order 100 feet of the “50% Black + 50% Red” option, you will receive 50 feet of black insulation welding cable and 50 feet of red insulation welding cable. Technical Specifications Conductor Material: Fully annealed bare stranded copper wire Insulation Material: EPDM (with polymer tape separator) Maximum Voltage: 600 VDC Operating Temperature: -50°C to 105°C Standards: IEC60245, RoHS
