Poolife pH Minus is a highly effective water balancer that is essential for maintaining the proper pH level in your pool. This white, granular form of sodium bisulfate (dry acid) is specifically designed to lower your pool’s pH levels, ensuring that the water remains balanced and safe for swimming. In addition, depending on how the product is applied, Poolife pH Minus can also be effective at lowering Total Alkalinity (TA). Easy to use and highly effective, this product is a must-have addition to your pool maintenance routine, ensuring that your pool stays in pristine condition for years to come. Dosage: Use Poolife pH Minus to lower pH While water is circulating, broadcast widely over the deep end of the pool If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool To Lower pH: Try to keep your pH levels between 7.2 – 7.8 Use this product if pH goes above 7.8 Proper dosages will vary The proper dosage is determined by your current pH First, test current pH. Then refer to product label for proper dosage to adjust pH To Lower Total Alkalinity: Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity Total alkalinity (TA) should be in the range of 80 – 120 ppm Adding 2 lbs. per 10,000 will lower TA by 10 ppm Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day Important: Remember, do not broadcast. The key is to add the acid in one isolated area
Poolife pH Minus is a highly effective water balancer that is essential for maintaining the proper pH level in your pool. This white, granular form of sodium bisulfate (dry acid) is specifically designed to lower your pool’s pH levels, ensuring that the water remains balanced and safe for swimming. In addition, depending on how the product is applied, Poolife pH Minus can also be effective at lowering Total Alkalinity (TA). Easy to use and highly effective, this product is a must-have addition to your pool maintenance routine, ensuring that your pool stays in pristine condition for years to come. Dosage: Use Poolife pH Minus to lower pH While water is circulating, broadcast widely over the deep end of the pool If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool To Lower pH: Try to keep your pH levels between 7.2 – 7.8 Use this product if pH goes above 7.8 Proper dosages will vary The proper dosage is determined by your current pH First, test current pH. Then refer to product label for proper dosage to adjust pH To Lower Total Alkalinity: Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity Total alkalinity (TA) should be in the range of 80 – 120 ppm Adding 2 lbs. per 10,000 will lower TA by 10 ppm Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day Important: Remember, do not broadcast. The key is to add the acid in one isolated area
Poolife Rapid Shock 1# (6 Pack)Part #22232/6 Poolife Rapid Shock is a calcium hypochlorite swimming pool shock used to combat algae and bacteria growth. This fast dissolving shock keeps pool water clean and clear with less work. Product Dosage: 9-16 ounces per 10,000 gallons of water to provide 5 to 10 ppm available chlorine every 7 days. Directions: Method for dosing directly into pool: Add the recommended dosage of this product during the evening hours while the filter pump is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of your pool. If any granules settle to the bottom of the pool, use brush to disperse. Water Balance: Opening Your Pool: For best results, see the “Water Balance” section on this label before treatment. Always adjust and maintain pH in the 7.2 to 7.6 range. Follow “Shock Treatment/SuperChlorination” directions on this package. Allow 30 minutes for product to disperse. Test available chlorine residual wit a pool test kit. Repeat treatment as needed. Shock Treatment/Superchlorination: For best results, see “Water Balance” and “how to Use” sections on the label before treatment. Every 7 days, or as necessary to prevent pool problems, shock treat/superchlorinate the pool by adding 9-16 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit. Ingredients: Calcium Hypochlorite 68 percent, Other Ingredients: 32 percent, Minimum Available Chlorine: 65 percent Returns are not accepted on opened or used products unless covered by an RMA/RGAIf you have any questions, please feel free to contact Clearview Fireplace and PatioWe would be happy to help Disclaimer: I will follow all applicable federal and state laws and regulations regarding the sale of the pesticideI won’t accept bids from, sell to, or ship to states in which the pesticide is not registered as a general-use product
Poolife pH Minus balancer lowers the pH of swimming pool water. The ideal pH range is 7.2-7.6. This product also lowers the total alkalinity of swimming pool water. We would be happy to help.
Poolife pH Minus balancer lowers the pH of swimming pool water. The ideal pH range is 7.2-7.6. This product also lowers the total alkalinity of swimming pool water. We would be happy to help.
