Poolife pH Minus is a highly effective water balancer that is essential for maintaining the proper pH level in your pool. This white, granular form of sodium bisulfate (dry acid) is specifically designed to lower your pool’s pH levels, ensuring that the water remains balanced and safe for swimming. In addition, depending on how the product is applied, Poolife pH Minus can also be effective at lowering Total Alkalinity (TA). Easy to use and highly effective, this product is a must-have addition to your pool maintenance routine, ensuring that your pool stays in pristine condition for years to come. Dosage: Use Poolife pH Minus to lower pH While water is circulating, broadcast widely over the deep end of the pool If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool To Lower pH: Try to keep your pH levels between 7.2 – 7.8 Use this product if pH goes above 7.8 Proper dosages will vary The proper dosage is determined by your current pH First, test current pH. Then refer to product label for proper dosage to adjust pH To Lower Total Alkalinity: Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity Total alkalinity (TA) should be in the range of 80 – 120 ppm Adding 2 lbs. per 10,000 will lower TA by 10 ppm Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day Important: Remember, do not broadcast. The key is to add the acid in one isolated area
Poolife pH Minus is a highly effective water balancer that is essential for maintaining the proper pH level in your pool. This white, granular form of sodium bisulfate (dry acid) is specifically designed to lower your pool’s pH levels, ensuring that the water remains balanced and safe for swimming. In addition, depending on how the product is applied, Poolife pH Minus can also be effective at lowering Total Alkalinity (TA). Easy to use and highly effective, this product is a must-have addition to your pool maintenance routine, ensuring that your pool stays in pristine condition for years to come. Dosage: Use Poolife pH Minus to lower pH While water is circulating, broadcast widely over the deep end of the pool If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool To Lower pH: Try to keep your pH levels between 7.2 – 7.8 Use this product if pH goes above 7.8 Proper dosages will vary The proper dosage is determined by your current pH First, test current pH. Then refer to product label for proper dosage to adjust pH To Lower Total Alkalinity: Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity Total alkalinity (TA) should be in the range of 80 – 120 ppm Adding 2 lbs. per 10,000 will lower TA by 10 ppm Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day Important: Remember, do not broadcast. The key is to add the acid in one isolated area
Poolife pH Minus balancer lowers the pH of swimming pool water. The ideal pH range is 7.2-7.6. This product also lowers the total alkalinity of swimming pool water. We would be happy to help.
Poolife pH Minus balancer lowers the pH of swimming pool water. The ideal pH range is 7.2-7.6. This product also lowers the total alkalinity of swimming pool water. We would be happy to help.
Baquacil pH Decreaser (6lb)Part #84463DescriptionBAQUACIL pH Decreaser (6 lb) is designed to lower the pH levels in your Baquacil treated swimming pool. Your pH level should be between 7.2-7.8 ppm.Dosage1 1/4 lb per 10,000 gallons of water will lower pH by 0.2 ppm.DirectionsTest your water’s pH every week with Baquacil Test Strips and adjust if necessary. Generally, 1 1/4 lb of Baquacil pH Decreaser in 10,000 gallons of pool water will lower pH by 0.2. Never add more than 2 lb of Baquacil pH Decreaser per 10,000 gallons in a single treatment.Allow the water to circulate for 12 to 24 hours. Recheck your pH reading. Repeat treatment as necessary until pH of 7.2 to 7.8 is obtained.Never make additions near metal fittings. Do not allow undissolved products to remain on the pool bottom. Brush any undissolved material to dissolve. Never allow the pool pH water to drop below 7.2 as damage to the pool surface and equipment may result. IngredientsSodium Bisulfate: 92%, Constituents ineffective as adjuvants: 8%Returns are not accepted on opened or used products and are subject to a 10% restocking feeAn RMA/RGA is required for all returnsBuyer pays all return shippingIf you have any questions, please contact Clearview Fireplace and PatioWe would be happy to help
Baquacil pH Decreaser (6lb)Part #84463DescriptionBAQUACIL pH Decreaser (6 lb) is designed to lower the pH levels in your Baquacil treated swimming pool. Your pH level should be between 7.2-7.8 ppm.Dosage1 1/4 lb per 10,000 gallons of water will lower pH by 0.2 ppm.DirectionsTest your water’s pH every week with Baquacil Test Strips and adjust if necessary. Generally, 1 1/4 lb of Baquacil pH Decreaser in 10,000 gallons of pool water will lower pH by 0.2. Never add more than 2 lb of Baquacil pH Decreaser per 10,000 gallons in a single treatment.Allow the water to circulate for 12 to 24 hours. Recheck your pH reading. Repeat treatment as necessary until pH of 7.2 to 7.8 is obtained.Never make additions near metal fittings. Do not allow undissolved products to remain on the pool bottom. Brush any undissolved material to dissolve. Never allow the pool pH water to drop below 7.2 as damage to the pool surface and equipment may result. IngredientsSodium Bisulfate: 92%, Constituents ineffective as adjuvants: 8%Returns are not accepted on opened or used products and are subject to a 10% restocking feeAn RMA/RGA is required for all returnsBuyer pays all return shippingIf you have any questions, please contact Clearview Fireplace and PatioWe would be happy to help
Hydria Clear 1″ Inch Swimming Pool & Spa Bromine Sanitizer Tabs Tablets – (Choose Size) Note: Chemicals are hazmat items and are non-returnable so PLEASE make sure you order the right chemical. If you accidentally order the wrong chemical Save More On Pool Supplies will not be able to take back the order. Please make sure you order the right item. Provides: 65% Bromine and 30% Chlorine Note: Someone will have to be home to sign for the package. If not, FedEx will not deliver the product. **Item image may vary from actual product!! We sell a lot of these bromine tablets and change brands based on availability. Please rest assured that the quality will be the same if not better** Bromine Tablets are a chemical sanitation treatment useful on both spas and pools. Our Bromine tablets, 1in in diameter, work best at 2.0 to 4.0 ppm. Its germ and algae killing is much less dependent on pH than is chlorine and there is no stabilizer buildup. Do not dispense in the skimmer. Remember that bromine dissolves only 1/10 as fast as chlorine and as a result requires more surface area exposure. We recommend the use of a brominator. Its germ and algae killing is much less dependent on pH than is chlorine and there is no stabilizer buildup. Please keep in mind that spent bromine is still useful in killing bacteria. 1″ Bromine Tablets are 65% Bromine and 30% Chlorine. They can be used with either floating dispensers or chemical feeders. A safe, yet effective alternative to chlorine, Bromine Tablets provide powerful sanitization while reducing the side effects of red eyes, skin irritation, and strong chemical odors. Ideal for indoor pools and spas, Bromine Tablets dissolve slowly and attack and eliminate algae and bacteria, leaving you with clear and healthy water. These 1-inch tablets are easy to handle and work well in floaters and automatic feeders. Keep pH between 7.2 and 7.6 and never allow to fall below 7.0. The dosage necessary for your pool will change considerably depending upon those factors that burden the disinfection system. Establish an effective active bromine residual of between 2 and 3 ppm. Test water frequently using a reliable test kit. Adjust the flow rate through the brominator if necessary to maintain the active bromine residual. Dosage: Add 17 tablets per 10,000 gallons every 5-7 days or as needed to maintain a bromine residual of 2-3 ppm at all times. Feed through spa float or automatic brominator. Active Ingredients: 1-Bromo-3-Chloro-5,5-Dimethylhydantoin….98.0% Other ingredients…………………………………2.0% Total………………………………………………..100% *12 Lbs is shipped as (3) 4 lb buckets. NOTE: Do not dispense bromine in the skimmer. Bromine dissolves at only 10% the speed that chlorine does, and as a result requires more surface area exposure.
