Poolife pH Minus is a highly effective water balancer that is essential for maintaining the proper pH level in your pool. This white, granular form of sodium bisulfate (dry acid) is specifically designed to lower your pool’s pH levels, ensuring that the water remains balanced and safe for swimming. In addition, depending on how the product is applied, Poolife pH Minus can also be effective at lowering Total Alkalinity (TA). Easy to use and highly effective, this product is a must-have addition to your pool maintenance routine, ensuring that your pool stays in pristine condition for years to come. Dosage: Use Poolife pH Minus to lower pH While water is circulating, broadcast widely over the deep end of the pool If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool To Lower pH: Try to keep your pH levels between 7.2 – 7.8 Use this product if pH goes above 7.8 Proper dosages will vary The proper dosage is determined by your current pH First, test current pH. Then refer to product label for proper dosage to adjust pH To Lower Total Alkalinity: Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity Total alkalinity (TA) should be in the range of 80 – 120 ppm Adding 2 lbs. per 10,000 will lower TA by 10 ppm Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day Important: Remember, do not broadcast. The key is to add the acid in one isolated area
Poolife pH Minus is a highly effective water balancer that is essential for maintaining the proper pH level in your pool. This white, granular form of sodium bisulfate (dry acid) is specifically designed to lower your pool’s pH levels, ensuring that the water remains balanced and safe for swimming. In addition, depending on how the product is applied, Poolife pH Minus can also be effective at lowering Total Alkalinity (TA). Easy to use and highly effective, this product is a must-have addition to your pool maintenance routine, ensuring that your pool stays in pristine condition for years to come. Dosage: Use Poolife pH Minus to lower pH While water is circulating, broadcast widely over the deep end of the pool If you would like to pre-dissolve and add pH Minus as a liquid, add the liquid as you walk around the sides of the pool To Lower pH: Try to keep your pH levels between 7.2 – 7.8 Use this product if pH goes above 7.8 Proper dosages will vary The proper dosage is determined by your current pH First, test current pH. Then refer to product label for proper dosage to adjust pH To Lower Total Alkalinity: Add the product in one localized area at the deepest end of the pool: this will create a localized pocket of low pH, which will lower your total alkalinity Total alkalinity (TA) should be in the range of 80 – 120 ppm Adding 2 lbs. per 10,000 will lower TA by 10 ppm Do not exceed 2 lbs. per 10,000 gallons per day: if additional adjustment is needed, add the following day Important: Remember, do not broadcast. The key is to add the acid in one isolated area
Baquacil pH Decreaser (6lb)Part #84463DescriptionBAQUACIL pH Decreaser (6 lb) is designed to lower the pH levels in your Baquacil treated swimming pool. Your pH level should be between 7.2-7.8 ppm.Dosage1 1/4 lb per 10,000 gallons of water will lower pH by 0.2 ppm.DirectionsTest your water’s pH every week with Baquacil Test Strips and adjust if necessary. Generally, 1 1/4 lb of Baquacil pH Decreaser in 10,000 gallons of pool water will lower pH by 0.2. Never add more than 2 lb of Baquacil pH Decreaser per 10,000 gallons in a single treatment.Allow the water to circulate for 12 to 24 hours. Recheck your pH reading. Repeat treatment as necessary until pH of 7.2 to 7.8 is obtained.Never make additions near metal fittings. Do not allow undissolved products to remain on the pool bottom. Brush any undissolved material to dissolve. Never allow the pool pH water to drop below 7.2 as damage to the pool surface and equipment may result. IngredientsSodium Bisulfate: 92%, Constituents ineffective as adjuvants: 8%Returns are not accepted on opened or used products and are subject to a 10% restocking feeAn RMA/RGA is required for all returnsBuyer pays all return shippingIf you have any questions, please contact Clearview Fireplace and PatioWe would be happy to help
