2 Pack 36/50/75/100/150/400/500/600 GPD Reverse Osmosis RO Membrane Water Filter

Wide Compatibility With the industry-standard 12″ x 2″ / 12″ x 3″ size, this high capacity RO element fits most standard 1812/3012 RO housing for the light commercial reverse osmosis water systems. Premium Material Our RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication. Deep Filtration The RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Authorized Certification Our Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 42/58 standards, providing safe-clean drinking water. Long Life Span Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. DIY RO System Membrane Solutions Rreverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. Important Information *It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. *The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. *Keep elements moist at all times after initial wetting. *To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. *The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. *Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Note Please check and confirm your choice of “Model” and “Pack”. For example, if you need 2 pieces of 100 GPD RO membrane filters, please choose “100 GPD” and “2 Pack”. On May 28, 2024 at 21:33:55 PDT, seller added the following information:

36/50/75/100/150/400/500/600 GPD Reverse Osmosis RO Membrane Water Filter 2″ 3″

Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: 36, 50, 75, 100, 150 GPD RO Membrane – Industry-standard element size 12″ x 2″, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Compatible with the following models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75, MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Comfee CMP10 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100, RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, GXRM10G, GXRM10RBL, TFC-24, TFM-18 Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV, GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) Hydro-Logic Stealth-RO150, Stealth-RO300 HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7, RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100, RO-5W6, RO9S MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50, RTW5, RTW5AK, RTW5AK, RTW5U Simpure ROULP-1812-75, ROULP-2012-100, T1, T2 Ukoke RO75GP, UWFS01L Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Watts Premier WP500032 400, 500, 600 GPD RO Membrane – Industry-standard element size 12″ x 3″, designed to fit in standard 2812/3012 residential-style RO membrane housings utilizing a 3-inch internal diameter. Compatible with the following models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi (36, 50, 75, 100, 150GPD), 100 psi (400, 500, 600GPD) Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Package Includes: **GPD: 1 x RO Membrane Filter **GPD RO+Housing: 1 x RO Membrane Filter, 1 x Housing, 1 x Wrench, 3 x Elbow FittingOn May 9, 2024 at 04:58:24 PDT, seller added the following information:

6 Pack 100/150 GPD RO Membrane Reverse Osmosis Purifier Water Filter Replacement

Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 12 x 2-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-36, ROULP-1812-50, ROULP-1812-75 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 12″ x 2″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 100 GPD – 2 Pack: 2 x 100 GPD RO Membrane 100 GPD – 4 Pack: 4 x 100 GPD RO Membrane 100 GPD – 6 Pack: 6 x 100 GPD RO Membrane 150 GPD – 2 Pack: 2 x 150 GPD RO Membrane 150 GPD – 4 Pack: 4 x 150 GPD RO Membrane 150 GPD – 6 Pack: 6 x 150 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On Aug 23, 2023 at 00:20:00 PDT, seller added the following information:

36/50/75/100/150/400/500/600 GPD RO Membrane Reverse Osmosis System Water Filter

Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: 36, 50, 75, 100, 150 GPD RO Membrane – Industry-standard element size 12″ x 2″, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Compatible with the following models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75, MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Comfee CMP10 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100, RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, GXRM10G, GXRM10RBL, TFC-24, TFM-18 Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV, GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) Hydro-Logic Stealth-RO150, Stealth-RO300 HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7, RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100, RO-5W6, RO9S MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50, RTW5, RTW5AK, RTW5AK, RTW5U Simpure ROULP-1812-75, ROULP-2012-100, T1, T2 Ukoke RO75GP, UWFS01L Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Watts Premier WP500032 200, 300, 400, 500, 600 GPD RO Membrane – Industry-standard element size 12″ x 3″, designed to fit in standard 2812/3012 residential-style RO membrane housings utilizing a 3-inch internal diameter. Compatible with the following models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi (36, 50, 75, 100, 150GPD), 100 psi (200, 300, 400, 500, 600GPD) Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Package Includes: 1 x RO Membrane FilterOn May 9, 2024 at 05:49:51 PDT, seller added the following information:

4 Pack 150 GPD RO Membrane Reverse Osmosis System Water Filter 12″x2″ Cartridges

Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 12 x 2-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-36, ROULP-1812-50, ROULP-1812-75, ROULP-2012-100 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 12″ x 2″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 1 Pack: 1 x 150 GPD RO Membrane 2 Pack: 2 x 150 GPD RO Membrane 3 Pack: 3 x 150 GPD RO Membrane 4 Pack: 4 x 150 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On Jan 2, 2024 at 18:51:04 PST, seller added the following information:

36/50/75/100/150/400/500/600 GPD Reverse Osmosis System RO Membrane Water Filter

Wide Compatibility With the industry-standard 12″ x 2″ / 12″ x 3″ size, this high capacity RO element fits most standard 1812/3012 RO housing for the light commercial reverse osmosis water systems. Premium Material Our RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication. Deep Filtration The RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Authorized Certification Our Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 42/58 standards, providing safe-clean drinking water. Long Life Span Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. DIY RO System Membrane Solutions Rreverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. Important Information *It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. *The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. *Keep elements moist at all times after initial wetting. *To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. *The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. *Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Package Includes 36/50/75/100/150/200/300/400/500/600 GPD RO Membrane: 1 x RO Membrane 36/50/75/100/150/200/300/400/500/600 GPD RO Membrane Housing Kit: 1 x RO Membrane 1 x Housing 1 x Wrench 3 x Elbow Fitting On Aug 6, 2023 at 18:52:23 PDT, seller added the following information:

36/50/75/100/150 GPD RO Membrane Under Sink Reverse Osmosis System Water Filter

Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, depends on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: XXGPD: 1 x RO Membrane Filter XXGPD+Housing: 1 x RO Membrane Filter 1 x Housing 3 x Quick-Connect Fitting 1 x WrenchOn Sep 2, 2023 at 10:01:59 PDT, seller added the following information:

50 Pack 150 GPD RO Membrane Under Sink Drink Reverse Osmosis System Water Filter

Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001 micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials such as bacteria and viruses, and harmful minerals, including other soluble salts found in water sources. Universal Membrane Size: Industry-standard element size 11.75 x 1.75-inch, designed to fit in standard 1812/2012 residential-style RO membrane housings utilizing a 2-inch internal diameter. Suitable for most home under sink Reverse Osmosis water filtration system. Compatible Filter Models: APEC MEM-ES-50, MEM-ES-75 AQUANOVA TW30-1812-50G, TW30-1812-100G Aquatic Life 330084, 330093 AXEON TF-1812-50, TF-1812-75, TF-1812-100, TF-1812-150 Desal TFM-18, TFM-50, TFM-75, TFM-100 Dow Filmtec TW30-1812-36, TW30-1812-50, TW30-1812-75 (BW60-1812-75), TW30-1812-100 Express Water FLTMEME50, FLTMEME100 FS-TFC TFC-1812-50, TFC-1812-75, TFC-2012-100 GE FX12M, FX12P, TFC-24, TFM-18 Geekpure GP-TW-1812-50G (HIDROTEK 50G), GP-TW-1812-75G (HIDROTEK 75G), GP-TW-1812-100G (HIDROTEK 100G) HUINING RO-1812-50, RO-1812-75, RO-2012-100, RO-2012-150 iSpring MC1, MC5, MC7 LiquaGen LG-30-2012, 75 GPD, 100 GPD Max Water RO-1812-50, RO-2012-100 Membrane Solutions ROULP-1812-36, ROULP-1812-50, ROULP-1812-75, ROULP-2012-100 MOPUEHEL HRE 1812-50, 1812-75, 2012-100, 2012-150 PureDrop PDR-ROM50 Simpure ROULP-1812-75, ROULP-2012-100 Vegebe ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 MewMore ROM-ES-50, ROM-ES-75, ROM-ES-100, ROM-ES-150 Compatible Reverse Osmosis System Models: APEC Water ESSENCE RO-90, RO-Hi, ROES-50, ROES-100, ROES-UV75, ROES-UV75-SS, RO-PERM, RO-PH90, ROES-PH75, ROES-PHUV75 Comfee CMP10 Express Water RO5DX, RO10MX, RODI10D, ROUV10DCG, ROALK5D, ROALKUV10M GE GXRM10G, GXRM10RBL Geekpure RO5, RO5-DI, RO5-PLUS, RO5-UV, O5-MF, RO5-AF, RO6-UV Hydro-Logic Stealth-RO150, Stealth-RO300 iSpring RCC1UP, RCC7, RCC7P, RCC100P, RO100, PH100, RCC7AK, RCC7AK-UV, RCC7D, RCC7P-AK, RCC1UP-AK Koolermax AR-122, AR-125 Max Water RO-5W6, RO9S PureDrop RTW5, RTW5AK, RTW5AK, RTW5U Simpure T1, T2 Ukoke RO75GP, UWFS01L Watts Premier WP500032 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Specifications: Filter Size: 11.75″ x 1.75″ (Fits standard 2″ ID membrane housings) Material: Polyamide Thin-Film Composite Filter Fineness: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 60 psi Package Includes: 1 Pack: 1 x 150 GPD RO Membrane 2 Pack: 2 x 150 GPD RO Membrane 4 Pack: 4 x 150 GPD RO Membrane 6 Pack: 6 x 150 GPD RO Membrane 8 Pack: 8 x 150 GPD RO Membrane 10 Pack: 10 x 150 GPD RO Membrane 20 Pack: 20 x 150 GPD RO Membrane 25 Pack: 25 x 150 GPD RO Membrane 50 Pack: 50 x 150 GPD RO MembraneOn Jun 20, 2024 at 22:45:22 PDT, seller added the following information: